Trim!

The next step was to make the baseboards. Of course, since nothing in this house is standard, we had to go out and buy 1x10 lumbar to make the baseboards out of. I cut it with the circular saw, and then had to use the orbit sander to bull-nose (round) the outer edge to match existing trim in the house.



A dry fit of the trim. I actually cut it right on the first try! (that never happens!)

OK, so I'm skipping a few steps, but here is the trim and corner-round, installed. The coloring looks a little off in this picture- you'll have to come visit to get the true effect of the wall!